Customize Default Values

Set the default values for your walls, partitions, slab, roof...


⚠️ This option is only available for the Professional or Enterprise Plan.

1.  Go to the 'Default values' section in dashboard menu on the left.
2. Select the measurement system whose default values you wish to change 1-18 measurement system
3.  Click on the pink 'Edit' icon at the bottom right.
4.  Modify the values using the up-down arrows or by typing the value in the dedicated field. Capture décran 2025-07-21 171242-png
5. Validate by clicking on the validation arrow at the bottom right, then click on continue to validate definitively. Capture d’écran 2025-07-21 171102-png

❗  Values selected for one measurement system are not applied to the other one.



You can modify the dimensions of the elements in the Layout and Roof step. 

  • For the 'Layout' step, you can set the thickness of the walls and partitions, the height of the slab/ceiling/finished floor...
  • For the 'Roof' step, you can set the height and pitch of the roof, the overhang length, and the presence or absence of soffit at bottom of the slope.

 

Customize default values

💡Note that you can also customize the default material for your exterior walls and/or roof.

1-18 Exterior wall material 1-18 Roof material

 

1-18 Change Material

  • In the 'Openings' step, you can choose the trim/finish for roof windows.
    1-18 roof window trim
  • In the 'Plan details' step, you can choose whether to display L.A. (living area)/T.I.A (total internal area) areas, as well as set the minimum height for the L.A.
    1-18 surface areas
  • In the 'Folder' step, you can define the default dimension line end style.
    1-18 measurement ends

❗ Changes will be automatically applied to your access / all accesses in your company.

⚠️ If you leave the page without validating the changes, they will not be taken into account.